ALUMINUM
Taint/Tabor CLEAN MIXED OLD ALLOY SHEET ALUMINUM
Tabor Shall consist of clean old alloy aluminum sheet of two or more alloys, free of foil, venetian blinds, castings, hair wire, screen wire, food or beverage containers, radiator shells, airplane sheet, bottle caps, plastic, dirt, and other non-metallic items. Oil and grease not to total more than 1%. Up to 10% Tale permitted.
Tense MIXED ALUMINUM CASTINGS
Shall consist of all clean aluminum castings which may contain auto and airplane castings but no ingots, and to be free of iron, brass, dirt and other non-metallic items. Oil and grease not to total more than 2%.
Twitch FLOATED FRAGMENTIZER ALUMINUM SCRAP (from Automobile Shredders)
Derived from wet or dry media separation device, the material must be dry and not contain more than 1% maximum free zinc, 1% maximum free magnesium, and 1% maximum of analytical iron. Not to contain more than a total 2% maximum of non-metallics, of which no more than 1% shall be rubber and plastics. To be free of excessively oxidized material, air bag canisters, or any sealed or pressurized items. Any variation to be sold by special arrangement between buyer and seller.
Teens SEGREGATED ALUMINUM BORINGS AND TURNINGS
Shall consist of aluminum borings and turnings of one specified alloy. Material should be free of oxida¬tion, dirt, free iron, stainless steel, magnesium, oil, flammable liquids, moisture and other non-metallic items. Fines should not exceed 3% through a 20 mesh (U.S. standard) screen.
Tough MIXED NEW ALUMINUM ALLOY CLIPPINGS AND SOLIDS
Shall consist of new, clean, uncoated and unpainted aluminum scrap of two or more alloys with a mini¬mum thickness of .015” (.38 mm) and to be free of hair wire, wire screen, dirt and other non-metallic items. Oil and grease not to total more than 1%. Also free from punchings less than 1/2” (1.27 cm) in size.
Trump ALUMINUM AUTO CASTINGS
Shall consist of all clean automobile aluminum cast¬ings of sufficient size to be readily identified and to be free from iron, dirt, brass, bushings, and non-metallic items. Oil and grease not to total more than 2%.
NICKEL
Aroma NEW NICKEL SCRAP
Shall consist of clean new sheet, plate, bar, tube, and any other wrought nickel scrap solids. Nickel mini¬mum 99%; Cobalt maximum 0.25%; Copper maxi¬mum 0.50%. Free of castings, as well as any foreign attachments or other contamination.
Burly OLD NICKEL SCRAP
Shall consist of old and/or new sheet, plate, bar, tube, and any other wrought nickel scrap solids. Material to contain a minimum of 98% nickel; Copper maximum 0.50%. This grade to be free of castings, soldered, brazed, sweated, or painted material, other metallic coating, foreign attachments, or any other contamina¬tion.
Dandy NEW CUPRO NICKEL CLIPS AND SOLIDS
Shall consist of clean, new, segregated (normally accepted analysis grades) either 70/30, 80/20, or 90/10 cupro nickel tube, pipe, sheet, plate, or other wrought solid forms. Must be free of foreign attach¬ments or any other contamination.
Daunt CUPRO NICKEL SOLIDS
Shall consist of old, and/or new, segregated (nor¬mally accepted analysis grades) either 70/30, 80/20, 90/10 cupro nickel tube, pipe, sheet, plate, or other wrought solid forms. Maximum 2% sediment allowable. Any other forms of cupro nickel solids such as castings, gates, risers, spills, etc., packaged separately, may or may not be included, only upon agreement between buyer and seller. Must be free of foreign attachments and all other contamination. Other particulars concerning physical description, analysis and packaging to be agreed upon between buyer and seller.
Delta SOLDERED CUPRO NICKEL SOLIDS
Shall consist of segregated (normally accepted analy¬sis grades) either 70/30, 80/20, 90/10 cupro nickel solids, soldered, brazed, or sweated material. Must be free of trimmed seams and edges and all other contamination.
Decoy CURPO NICKEL SPINNINGS, TURNINGS, BORINGS
Shall consist of clean, segregated (normally accept¬ed analysis grades) either 70/30, 80/20, 90/10 cupro nickel spinnings, turnings, or borings. Particu¬lars concerning physical description, analysis, and packaging, to be agreed upon between buyer and seller.
Depth MISCELLANEOUS NICKEL-COPPER AND NICKEL-COPPER IRON
Shall consist of miscellaneous scrap in which the basic elements, by weight, are nickel and copper, such as copper nickel peelings, plating racks, and hangers, and all nickel and copper in attached or combined form. In all cases, miscellaneous nickel copper scrap should be sold by description and analysis.
COPPER
Barley No. 1 COPPER WIRE
Shall consist of No. 1 bare, uncoated, unalloyed cop¬per wire, not smaller than No. 16 B & S wire gauge. Green copper wire and hydraulically compacted material to be subject to agreement between buyer and seller.
Berry No. 1 COPPER WIRE
Shall consist of clean, untinned, uncoated, unalloyed copper wire and cable, not smaller than No. 16 B & S wire gauge, free of burnt wire which is brittle. Hydraulically briquetted copper subject to agree¬ment.
Birch No. 2 COPPER WIRE
Shall consist of miscellaneous, unalloyed copper wire having a nominal 96% copper content (mini¬mum 94%) as determined by electrolytic assay. Should be free of the following: Excessively leaded, tinned, soldered copper wire; brass and bronze wire; excessive oil content, iron, and non-metallics; copper wire from burning, containing insulation; hair wire; burnt wire which is brittle; and should be reasonably free of ash. Hydraulically briquetted copper subject to agreement.
Candy No. 1 HEAVY COPPER
Shall consist of clean, unalloyed, uncoated copper clippings, punchings, bus bars, commutator segments, and wire not less than 1/16 of an inch thick, free of burnt wire which is brittle; but may include clean cop¬per tubing. Hydraulically briquetted copper subject to agreement.
Cliff No. 2 COPPER
Shall consist of miscellaneous, unalloyed copper scrap having a nominal 96% copper content (mini¬mum 94%) as determined by electrolytic assay. Should be free of the following: Excessively leaded, tinned, soldered copper scrap; brasses and bronzes; excessive oil content, iron and non-metallics; cop¬per tubing with other than copper connections or with sediment; copper wire from burning, containing insulation; hair wire; burnt wire which is brittle; and should be reasonably free of ash. Hydraulically bri¬quetted copper subject to agreement.
STEEL SCRAP
Hitch NEW R-MONEL CLIPPINGS AND SOLIDS
Shall consist of clean, new, R-Monel sheet, plate, bar, rod, tube, pipe, or any other wrought scrap. Must be free of any foreign attachments or all other contami¬nation.
House NEW MIXED MONEL SOLIDS AND CLIPPINGS
Shall consist of new, clean R and K-Monel solids and clippings. Free of cast material, foreign attachments and all other contamination.
Ideal OLD MONEL SHEET AND SOLIDS
Shall consist of clean R and K-Monel solids such as sheet, plate, pipe, rods, forgings, screen and wire cloth. Must be free of soldered, brazed, welded, or sweated material, cast material, foreign attach¬ments, and all other contamination.
Indian K-MONEL SOLIDS
Shall consist of clean K-Monel solids.
Junto SOLDERED MONEL SHEET AND SOLIDS
Shall consist of soldered and/or brazed miscellaneous grades of Monel alloys in either wrought or cast form. Must be free of trimmed seams and edges, non-metal¬lic filling, foreign attachments, and all other contami¬nation. Particulars concerning physical description, assay, and packaging to be agreed upon between buyer and seller.
Lemon MONEL CASTINGS
Shall consist of various types of clean Monel cast¬ings, assaying minimum 60% nickel. Must be free of foreign attachments or any other contamination.
Lemur MONEL TURNINGS
Shall consist of mixed Monel turnings and borings containing a minimum of 60% nickel content, on a dry basis.
Pekoe 200 SERIES STAINLESS STEEL SCRAP SOLIDS
Shall consist of all types of clean AISI Series Stainless Steel Scrap Solids, which contain a maximum of .5% copper, free of foreign attachments and other con¬tamination.
Sabot STAINLESS STEEL SCRAP
Shall consist of clean 18-8 type stainless steel clips and solids containing a minimum 7% nickel, 16% chrome, and have a maximum of .50% molybde¬num, .50% copper, .045% phosphorous, and .03% sulfur, and otherwise free of harmful contaminants. Particulars concerning physical description, grading, additional analysis, and preparation to be agreed upon between buyer and seller.
Ultra STAINLESS STEEL TURNINGS
Shall consist of clean 18-8 type stainless steel turn¬ings containing a minimum 7% nickel and 16% chrome, and to be free of nonferrous metals, non¬metallics, excessive iron, oil and other contaminants. Particulars concerning physical description, assay, and packaging to be agreed upon between buyer and seller.
Vaunt EDISON BATTERIES
Nickel-iron batteries to be sold free of crates, copper terminal connectors, and excess liquid. Must be free of nickel cadmium batteries.
BRASS
Ebony COMPOSITION OR RED BRASS
Shall consist of red brass scrap, valves, machinery bearings and other machinery parts, including mis¬cellaneous castings made of copper, tin, zinc, and/or lead. Shall be free of semi-red brass castings (78% to 81% copper); railroad car boxes and other similar high-lead alloys; cocks and faucets; closed water meters; gates; pot pieces; ingots and burned brass; aluminum, silicon, and manganese bronzes; iron and non-metallics. No piece to measure more than 12” over any one part or weigh over 100 lbs. Heavier pieces acceptable upon mutual agreement between buyer and seller.
Eland HIGH GRADE—LOW LEAD BRONZE/BRASS SOLIDS
It is recommended these materials be sold by analy¬sis.
Elias HIGH LEAD BRONZE SOLIDS AND BORINGS
It is recommended that these materials be sold on sample or analysis.
Engel MACHINERY OR HARD BRASS SOLIDS
Shall have a copper content of not less than 75%, a tin content of not less than 6%, and a lead content of not less than 6% nor more than 11%, and total impurities, exclusive of zinc, antimony, and nickel of not more than 0.75%; the antimony content not to exceed 0.50%. Shall be free of lined and unlined standard red car boxes.
Erin MACHINERY OR HARD BRASS BORINGS
Shall have a copper content of not less than 75%, a tin content of not less than 6%, and a lead content of not less than 6% nor more than 11%, and the total impurities, exclusive of zinc, antimony, and nickel of not more than 0.75%; the antimony content not to exceed 0.50%.
Honey YELLOW BRASS SCRAP
Shall consist of mixed yellow brass solids, including brass castings, rolled brass, rod brass, tubing and miscellaneous yellow brasses, including plated brass. Must be free of manganese-bronze, aluminum-bronze, unsweated radiators or radiator parts, iron, and excessively dirty and corroded materials. Must also be free of any type of munitions including, but not limited to, bullet casings.
Nomad YELLOW BRASS TURNINGS
Shall consist of yellow brass turnings, free of alumi¬num, manganese and composition turnings, not to contain over 3% of free iron, oil or other moisture; to be free of grindings and babbitts. To avoid dis¬pute, to be sold subject to sample or analysis.
Ocean MIXED UNSWEATED AUTO RADIATORS
Shall consist of mixed automobile radiators, to be free of aluminum radiators, and iron-finned radia¬tors. All radiators to be subject to deduction of actual iron. The tonnage specification should cover the gross weight of the radiators, unless otherwise specified.
